Cable Harnesses Vertical Flame Spread Tester

Product Information
Cable and cable bundles vertical flame spread tester, VTFT 2008,

IEC 60332-3, KS C IEC 60332-3-10, 21~25 Cable and cable bundles vertical flame spread tester IEC 60332-3-10, KS C IEC 60332-3-21~25 (Category A~D) standards It is suitable.

Vertical flame expansion measurement test is performed electronically or optically in the test cabin by providing a cable or wire igniter and air in accordance with the relevant standard.

If the product is to be applied at 20 degrees, it is produced in accordance with the IEEE383 (IEEE1202) standard.

standards

• IEC 60332-3-10 : Electrical cables elv location part 3 : Cable bundles and cable wire testing

• KS C IEC 60332-3-21 : Category A F/R

• KS C IEC 60332-3-22 : Category A

• KS C IEC 60332-3-23 : Category B

• KS C IEC 60332-3-24 : Category C

• KS C IEC 60332-3-25 : Category D

Features

Test cabinet dimensions 1,000±100(W) x 2,000±100(D) x 4,000±100(H) mm. The bottom surface of the cabinet is higher than the floor and the back is insulated from the wall

At the bottom of the cabin, there are air supply holes with dimensions of 800±20(W) x 400±10(D) and a diameter of 150±10mm.

There is an air chimney on the cabin

There are gas analyzers and other equipment connected to this chimney.